Review by HONG BOON HOW (The Star Online)
The Perodua MPV finds winning ways to give motorists what they want.
T sells some 7,000 units every month, is relatively cheap and has ample room for five passengers. It has a preppy engine and looks smart. It’s not expensive to maintain and retains its resale value. It’s not surprising therefore that the Perodua Myvi is the best-selling car in the country.
But what the Myvi lacks is decent rear boot space – which is particularly felt during the balik kampung ride during the festive season, or as the kids in the family grow bigger and bigger.
The Perodua Alza can take up to seven passengers without too much of a squeeze.
Would making a bigger Myvi be a step in the right direction?
Absolutely, say the people at Perodua, who feel they have a found winning formula in the Alza, a multi-purpose vehicle launched on Monday.
Looking much like a stretched, raised and pumped up Myvi, the new MPV has three rows of seats and can seat seven – its key attraction.
Alza, which is Spanish for “rise”, is also synonymous with “amplify, enhance and heighten”. The vehicle is slightly higher than the Myvi and has been stretched by 455mm, Its wheelbase is also longer by 310mm; in fact, it is close to the Toyota Camry – a good indication of its interior space.
Perodua managing director Datuk Syed Hafiz Syed Abu Bakar says the Alza, with its flexible seating configuration, can be turned into a car with a big boot when you don’t need the extra back seats for seven passengers.
“It’s like Superman. It becomes that when you need it,” Syed Hafiz said at a media preview of the MPV in Putrajaya earlier this month.
The introduction of the Alza is part of the second national carmaker’s dynamic move to offer vehicles that meet current motoring trends.
With the average size of most Malaysian families shrinking to four from six, Syed Hafiz says the majority of its potential customers don’t actually need a huge MPV.
“It just has to be a vehicle with the right amount of interior space. A size that is too large will also make the MPV clumsy and difficult to drive on narrow roads,” he says.
The Alza shares its underpinnings with the Daihatsu Boon Luminas and Toyota Passo Sette seven-seaters. Under the bonnet is a twin camshaft with dynamic variable valve timing (DVVT) 1.5-litre engine code named 3SZ-VE, similar to the type in the Toyota Avanza and Perodua Nautica.
The nifty utility box behind the steering wheel for storing small items.
Tuned for fuel economy, the Azla’s power is rated at 104bhp at 6,000rpm or five horses short of the Avanza and Nautica’s 109bhp. However, its maximum torque of 136Nm is the same as that of theirs.
“As the Alza is not too heavy at 1.1 tonne, its power-to-weight ratio with a 1.5-litre engine is pretty good,” says Syed Hafiz.
Transmission options are the four-speed automatic and five-speed manual while trim levels are the Standard and Premium. Front and rear brake set-ups are discs and drums, respectively, on both grades.
Front suspension is the MacPherson type while the rear uses the torsion beam with stabiliser bar.
Inside, the Alza comes in grey and light grey, with a centrally located instrument cluster that features a trip computer with readouts of average fuel consumption and how far you can go before the tank empties.
The temperature gauge is missing but the fuel gauge, speedometer and tachometer are still there.
With its higher roofline, the Alza gets more headroom for an airier feel.
The gearshift for the automatic is console-mounted, while that for the manual is located on the floor between the driver and front passenger. This arrangement allows the automatic variant to come with bench-type front seats with a 60:40 split, a feature rarely found in locally available MPVs.
In essence, the front passenger can slide over to the driver’s seat without having to get out of the MPV – useful when taking over the wheel after dropping someone off.
In our opinion, the third row seats are more suitable for children although adults can squeeze in there.
Sleek, streamlined and downright trendy!
The second row seats are fitted on rails and can slide forward by 150mm to provide more legroom for third row passengers.
What’s more, the three rows of seats can be folded for a flat configuration.
Cup and bottle holders are scattered around the MPV, on the door pockets and armrests.
Although not equipped with air-conditioner vents for the second and third row seats, Perodua claims that the Alza has a more powerful cooling coil and blower fan than the Myvi.
“We have conducted tests and can say that third-row passengers will have enough cool air, even on hot days,” says Perodua Sales Sdn Bhd operation director Ahmad Suhaimi Mohd Anuar.
In addition, the Alza gets all-round ultraviolet protected glass that cuts down UV rays by 91%.
At the media preview, we get to try out both automatic and manual variants at Putrajaya. With four persons on board, performance on an uphill slope is still adequate but one has to remember that this is an MPV, and the engine needs to be revved a bit more.
Once speed has built up, however, little effort is needed to keep the vehicle on the move. The five-speed manual gives us a gutsier performance since the better spaced gear ratios allow for better use of the engine powerband.
The clutch pedal is not heavy and we reckon it won’t tire out our left foot when inching through a traffic jam.
According to Perodua, the Alza with automatic transmission promises a low fuel consumption of 12.7km per litre of petrol or roughly 14 sen per km on RON95 fuel. The manual variant is even more frugal – 15.5km per litre of fuel.
Available features across the Standard and Premium grades are headlights with projector elements, grille with chrome garnishing, LED tail lights and 185/55/R15 tyres.
The Premium variant has additional features like dual front air bags, anti-lock braking system with electronic brake force distribution and brake assist, fog lights, tail spoiler, audio system with Bluetooth/USB support and leather steering wheel with audio controls.
The trunk comes with a luggage lamp, an item that is sorely lacking in Myvis.
Available colours are solid Ivory White and metallic Medallion Grey, Glittering Silver, Ebony Black and Pearl White. The Premium variant gets the additional metallic Classy Purple.
Prices on the road start at RM56,000 for the Standard manual to RM64,000 for the Premium automatic.
The Advanced variant – delivery of which starts in March – will cost RM6,000 over the Premium version and will feature additional goodies such as body kits, leather seats, tinted windows, a satellite navigation system and reverse camera.
Sunday, November 29, 2009
Perodua Alza MPV goes on sale Tuesday
KUALA LUMPUR: The newly launched 1.5litre Perodua Alza MPV goes on sale Tuesday.
The prices range between RM56,000 to RM64,000 per unit for the standard model and between RM67,000 and RM70,000 for the advanced version.
Alza, which means “to rise” in Spanish, rose to the occasion when it was launched with the tagline “Versatile As You” at a ceremony that saw about 900 industry players, Perodua staff, local and foreign journalists and car enthusiasts.
It has already seen 3,500 bookings in ten days.
It was learnt that waiting periods for delivery to buyers of the Alza could be as short as ten days or within three months.
The 1.5-litre engine Alza comes in six variants - two standards and two premiums with either 4-speed automatic or 5-speed manual transmissions.
Two more advanced versions will go on sale from March next year with complete bodykit, GPS with reverse camera, tinted windows and leather seats.
The seven-seater comes standard with projector headlamps, LED taillights, centre-mounted meter panels and a second row seat with a 150mm sliding room on rails.
Its audio system accommodates CD, MP3 and WMA formats with a USB portand Bluetooth connectivity thrown in for the premium versions.
The premium versions also feature for the first time in Peroduavehicles switches for the audio system such as volume control andradio channel dial.
The meter panel’s multi-info display also shows average fuel consumption and maximum travelling range at the current fuel level.
Aimed at young families and single urban males and females, the Alza also debuted with a new colour, Classy Purple along with Ebony Black, Ivory White, Pearl White, Medallion Grey, and Glittering Silver.
Perodua managing director Datuk Hafiz Syed Abu Bakar said the best selling national car maker targeted to sell between 3,500 and 4,000 units of the new MPV monthly.
He added that the Alza was all about giving passengers the space they needed with the handling that feels like one is driving a car.
“It’s all about how you use space. All about being versatile and stylish and keeping it affordable to own and maintain.
“With the introduction of the Alza, Perodua aims to maintain its pole position in 2010 in terms of sales with a target of 176,000, the highest ever for Perodua,” he told reporters before the launch.
It was launched by Deputy Prime Minister Tan Sri Muhyiddin Yassin at the Kuala Lumpur Convention Centre Monday.
Regarded as the “most Malaysian” Perodua to date, Perodua chairman TanSri Asmat Kamaludin said the MPV was developed with nearly 90 percent locally made components.
It was developed over two years by Perodua with about RM300mil in investment.
The bestselling MyVi was developed with RM280mil in 2005 and RM240mil for the Viva launched in 2007.
“The Alza represents the maturity of Malaysian automotive vendors in producing high end parts.
“Overall, we have 100 vendors on the Alza project, of which 94 are local companies,” Asmat said.
The prices range between RM56,000 to RM64,000 per unit for the standard model and between RM67,000 and RM70,000 for the advanced version.
Alza, which means “to rise” in Spanish, rose to the occasion when it was launched with the tagline “Versatile As You” at a ceremony that saw about 900 industry players, Perodua staff, local and foreign journalists and car enthusiasts.
It has already seen 3,500 bookings in ten days.
It was learnt that waiting periods for delivery to buyers of the Alza could be as short as ten days or within three months.
The 1.5-litre engine Alza comes in six variants - two standards and two premiums with either 4-speed automatic or 5-speed manual transmissions.
Two more advanced versions will go on sale from March next year with complete bodykit, GPS with reverse camera, tinted windows and leather seats.
The seven-seater comes standard with projector headlamps, LED taillights, centre-mounted meter panels and a second row seat with a 150mm sliding room on rails.
Its audio system accommodates CD, MP3 and WMA formats with a USB portand Bluetooth connectivity thrown in for the premium versions.
The premium versions also feature for the first time in Peroduavehicles switches for the audio system such as volume control andradio channel dial.
The meter panel’s multi-info display also shows average fuel consumption and maximum travelling range at the current fuel level.
Aimed at young families and single urban males and females, the Alza also debuted with a new colour, Classy Purple along with Ebony Black, Ivory White, Pearl White, Medallion Grey, and Glittering Silver.
Perodua managing director Datuk Hafiz Syed Abu Bakar said the best selling national car maker targeted to sell between 3,500 and 4,000 units of the new MPV monthly.
He added that the Alza was all about giving passengers the space they needed with the handling that feels like one is driving a car.
“It’s all about how you use space. All about being versatile and stylish and keeping it affordable to own and maintain.
“With the introduction of the Alza, Perodua aims to maintain its pole position in 2010 in terms of sales with a target of 176,000, the highest ever for Perodua,” he told reporters before the launch.
It was launched by Deputy Prime Minister Tan Sri Muhyiddin Yassin at the Kuala Lumpur Convention Centre Monday.
Regarded as the “most Malaysian” Perodua to date, Perodua chairman TanSri Asmat Kamaludin said the MPV was developed with nearly 90 percent locally made components.
It was developed over two years by Perodua with about RM300mil in investment.
The bestselling MyVi was developed with RM280mil in 2005 and RM240mil for the Viva launched in 2007.
“The Alza represents the maturity of Malaysian automotive vendors in producing high end parts.
“Overall, we have 100 vendors on the Alza project, of which 94 are local companies,” Asmat said.
Sunday, November 22, 2009
Perodua MPV- latest updates on dyno
Perodua will be launching the new Perodua MPV/SUV very soon. I just got some sneak preview of the latest Perodua MPV , latest updates. Well, designwise, it is ok,,quite ok, and very nice though.The Perodua MPV will be based on the Toyota Passo Sette(also known as the Daihatsu Boon Luminas) and has been called the codename Perodua D46T for the development stage.
But, unlike any other MPVs, this Perodua MPV is just like Proton Exora. But accoding to Perodua’s head honcho Datuk Syed Hafiz has stated repeatedly to the mainstream media that the new Perodua D46T MPV is positioned mainly as a car with a large boot instead of an MPV (I believe the proper term for that is wagon). They won’t be trying to go head to head against the Exora or other MPVs, or at least that’s what they are saying now in the interviews that you see in the mainstream media every month.
It will be based on the recently announced new Indonesian-based MPV model that was announced in March this year and is currently still under development by Toyota and Daihatsu. Perodua will apply its own styling onto the model. The upcoming Perodua MPV is still pretty far off, set to roll off the production lines only in September 2009, but here is a rendered speculation by Theophilus Chin of how it will might look like. Based on an existing Toyota compact MPV, the styling for this three row MPV rendering is largely based off the Perodua Viva.
The timing for Perodua could not be any worse. After the launch of Exora, the only marketing maneuver option for P2 is to lower (significantly) on the road price of their MPV.
But, unlike any other MPVs, this Perodua MPV is just like Proton Exora. But accoding to Perodua’s head honcho Datuk Syed Hafiz has stated repeatedly to the mainstream media that the new Perodua D46T MPV is positioned mainly as a car with a large boot instead of an MPV (I believe the proper term for that is wagon). They won’t be trying to go head to head against the Exora or other MPVs, or at least that’s what they are saying now in the interviews that you see in the mainstream media every month.
It will be based on the recently announced new Indonesian-based MPV model that was announced in March this year and is currently still under development by Toyota and Daihatsu. Perodua will apply its own styling onto the model. The upcoming Perodua MPV is still pretty far off, set to roll off the production lines only in September 2009, but here is a rendered speculation by Theophilus Chin of how it will might look like. Based on an existing Toyota compact MPV, the styling for this three row MPV rendering is largely based off the Perodua Viva.
The timing for Perodua could not be any worse. After the launch of Exora, the only marketing maneuver option for P2 is to lower (significantly) on the road price of their MPV.
Thursday, November 19, 2009
Perodua Viva 2 New Colours
The Perodua Viva was originally launched with 5 colours – Pearl Jade, Tropical Green, Ivory White, Passion Red and Glittering Silver. From what I’ve seen on the roads lately, Pearl Jade seems to be the most popular one, though maybe it’s just by chance that I seem to see only Pearl Jade Perodua Vivas running around wherever I am.
There are two new colours now. One of them is a nice blue that we’ve seen before during the spyshots called Sapphire Blue, and the other is Ebony Black. Pictured above is the Sapphire Blue Perodua Viva, and after the jump you will be able to see the Ebony Black version as well as all the original colours available from the launch date.
Monday, November 16, 2009
Perodua Alza MPV
Coming Soon!!
Perusahaan Otomobil Kedua Sdn Bhd (Perodua) is projecting record sales next year as its new multi-purpose vehicle (MPV) is expected to see brisk sales of at least 3,500 units a month, said managing director Datuk Syed Abdull Hafiz Syed Abu Bakar.
The company expects to sell 162,000 cars this year after hitting a record 168,000 units in 2008.
However, the improvement in the economy and demand for automobiles, especially its latest model, has left Perodua feeling optimistic about sales in 2010.
Speaking after unveiling the MPV to the media yesterday, Syed Hafiz said the company’s internal surveys showed there was a big demand among Perodua customers for an MPV and one that was competitively priced and fuel efficient.
“With this new model, the oldest model in our line-up will be the Myvi,’’ he said.
The Myvi was launched in 2005, followed by the Viva in 2007.
Helping its projections for next year is the better sales performance expected in the fourth quarter of this year whereby 38,207 cars are expected to be sold compared with 36,945 in the final quarter of 2008.
Production of the MPV is slated at 4,100 units a month, a number which Syed Hafiz also hopes would be the monthly sales.
The MPV is priced at between RM56,000 and RM64,000 and will be officially launched on Nov 23.
The public can start placing their orders for the new MPV from Nov 13.
Perusahaan Otomobil Kedua Sdn Bhd (Perodua) is projecting record sales next year as its new multi-purpose vehicle (MPV) is expected to see brisk sales of at least 3,500 units a month, said managing director Datuk Syed Abdull Hafiz Syed Abu Bakar.
The company expects to sell 162,000 cars this year after hitting a record 168,000 units in 2008.
However, the improvement in the economy and demand for automobiles, especially its latest model, has left Perodua feeling optimistic about sales in 2010.
Speaking after unveiling the MPV to the media yesterday, Syed Hafiz said the company’s internal surveys showed there was a big demand among Perodua customers for an MPV and one that was competitively priced and fuel efficient.
“With this new model, the oldest model in our line-up will be the Myvi,’’ he said.
The Myvi was launched in 2005, followed by the Viva in 2007.
Helping its projections for next year is the better sales performance expected in the fourth quarter of this year whereby 38,207 cars are expected to be sold compared with 36,945 in the final quarter of 2008.
Production of the MPV is slated at 4,100 units a month, a number which Syed Hafiz also hopes would be the monthly sales.
The MPV is priced at between RM56,000 and RM64,000 and will be officially launched on Nov 23.
The public can start placing their orders for the new MPV from Nov 13.
Tuesday, November 10, 2009
KERETA VIVA: Perodua Viva Versus Hyundai i10 - Compact wars!
Here Comes The New Challenger!
Hyundai Sime-Darby Motor has launched the new Hyundai i10 5-door hatchback in Malaysia. The i10 replaces the Atos in the Hyundai global line-up but in certain countries like India, both the Atos (Santro) and the i10 is offered, with the latter being the more premium product. In fact, the i10 we get here comes from India where both the Atos and i10 are very very popular products, instead of Korea.
All the basics that will make the new Hyundai a popular runabout are there: a small luggage space extendable via the foldable rear seats and a 4-speed automatic. It chugs along via a 1.1 liter Epsilon family engine (sadly not the new Kappa 1.2 liter) putting out 65.8 horsepower at 5,500rpm and 99.1Nm of torque at a lower than usual 2,800rpm which should allow it to feel pretty zippy around town.
Safety features include a 4-star Euro NCAP body, dual SRS airbags and anti-lock brakes. In-car entertainment is an integrated 2-DIN audio CD player with MP3 and aux input support. The interior is rather monotonous and basic with endless fields of grey but there is a slight touch of “high-end” thanks to the dash-mounted shift lever instead of it being in the conventional position between the two front seats.
So you have decent safety specs, an acceptable level of in-car entertainment, an automatic gearbox, an engine that puts out peak torque at a low-mid RPM, and a price under RM50k. This should theoretically be very popular with city dwellers, especially since its claimed to have a 17.2km per liter combined fuel economy. It’s also got nice styling, being the first Hyundai car in Malaysia with the new naming scheme and design language that debuted with the i30. But Malaysians are just too brand conscious.
The 4-speed auto model retails for RM48,888 OTR with insurance and comes with a 5-year (300,000km) warranty. It is available in five colours: alpine blue, blushing red, stone black, sleek silver and champagne gold. A 5-speed manual version (that is claimed to get 20km per liter) is also available but strangely Hyundai’s press kit does not mention its price. This story will be updated later when the price is available.
The badging on the car is a little confusing but somehow expected. It has a combination of both Inokom and Hyundai logos and badges around the car.
Hyundai Sime-Darby Motor has launched the new Hyundai i10 5-door hatchback in Malaysia. The i10 replaces the Atos in the Hyundai global line-up but in certain countries like India, both the Atos (Santro) and the i10 is offered, with the latter being the more premium product. In fact, the i10 we get here comes from India where both the Atos and i10 are very very popular products, instead of Korea.
All the basics that will make the new Hyundai a popular runabout are there: a small luggage space extendable via the foldable rear seats and a 4-speed automatic. It chugs along via a 1.1 liter Epsilon family engine (sadly not the new Kappa 1.2 liter) putting out 65.8 horsepower at 5,500rpm and 99.1Nm of torque at a lower than usual 2,800rpm which should allow it to feel pretty zippy around town.
Safety features include a 4-star Euro NCAP body, dual SRS airbags and anti-lock brakes. In-car entertainment is an integrated 2-DIN audio CD player with MP3 and aux input support. The interior is rather monotonous and basic with endless fields of grey but there is a slight touch of “high-end” thanks to the dash-mounted shift lever instead of it being in the conventional position between the two front seats.
So you have decent safety specs, an acceptable level of in-car entertainment, an automatic gearbox, an engine that puts out peak torque at a low-mid RPM, and a price under RM50k. This should theoretically be very popular with city dwellers, especially since its claimed to have a 17.2km per liter combined fuel economy. It’s also got nice styling, being the first Hyundai car in Malaysia with the new naming scheme and design language that debuted with the i30. But Malaysians are just too brand conscious.
The 4-speed auto model retails for RM48,888 OTR with insurance and comes with a 5-year (300,000km) warranty. It is available in five colours: alpine blue, blushing red, stone black, sleek silver and champagne gold. A 5-speed manual version (that is claimed to get 20km per liter) is also available but strangely Hyundai’s press kit does not mention its price. This story will be updated later when the price is available.
The badging on the car is a little confusing but somehow expected. It has a combination of both Inokom and Hyundai logos and badges around the car.
Monday, November 9, 2009
Perodua Viva From Malaysia
Sunday, November 8, 2009
Proton is the Malaysian national automobile manufacturer (Malay acronym for PeRusahaan OTOmobil Nasional, 'National Automobile Enterprise'), which was established in 1983 under the direction of the former Prime Minister, Dr. Mahathir Mohamad. Proton Holdings Berhad, the holding company, is listed on the Bursa Malaysia.
History
Based on technology and parts from Mitsubishi Motors, production of the first model, the Proton Saga began in September 1985 at its first manufacturing plant in Shah Alam, Selangor. Initially the components of the car were entirely manufactured by Mitsubishi but slowly local parts were being used as technologies were transferred and skills were gained. The 100,000th Proton Saga was produced in January 1989.[1]
Until the end of the 1990s, the car's logo featured the crest from Malaysia's coat of arms, featuring a crescent and a fourteen-pointed star. The new Proton logo features a stylized tiger head. In 1993, a model called Proton Wira was introduced based on the Mitsubishi Lancer/Colt. More than 220,000 units were sold between 1996 and 1998.[2] Proton Perdana, based on the Mitsubishi Galant/Eterna, was first produced in 1995, intended for higher end market. The Proton Waja (Proton Impian in UK), which launched early 2001, is the first car model designed internally by Proton. By 2002 Proton held a market share of over 60% in Malaysia, which was reduced to barely 30% by 2005 and is expected to reduce further in 2008 when AFTA mandates reduce import tariffs to a maximum of 5%.
The current Proton logo, in text form.
With the acquisition of Lotus technologies in 1996 from ACBN Holdings (a company owned by the owner of Bugatti), Proton has gained an additional source of engineering and automotive expertise. This led to the production of Proton Gen-2 which was code name Wira Replacement Model (WRM) before the launch. The Gen-2 is the first of cars to be manufactured and assembled at the new manufacturing plant in Tanjung Malim, Perak which is part of Proton City development project. The plant was opened in 2004. On 8 June 2005 Proton introduced the second model to be manufactured in Tanjung Malim, the 1,200 cc 5-door supermini, the Proton Savvy. Both the Gen-2 and Savvy, were models that MG Rover was looking to rebadge when the British firm entered into collaboration talks with Proton. However these joint-venture talks were unsuccessful and MG Rover subsequently collapsed.
In 2007, Proton launch its new sedan as replacement version for Wira Sedan but with new name, Persona. The new Proton Saga replacement model (codename Proton BLM) was launched on 18 January 2008. The new Saga is based on the Savvy platform, but using Campro 1.3L instead of Renault engine. It was announced on August 8, 2008 that Proton is developing a new, fuel-efficient hybrid car to beat rising costs and address environmental concerns. Prime Minister Abdullah Ahmad Badawi told reporters that he had already test-driven the car and urged the company to continue researching energy-saving techonologies. [3]
As of 3 August 2008, Proton has produced 3 million cars since 1985, where the 3 millionth car is a second-generation Saga.[4]
Exports
Proton exports cars to the United Kingdom, South Africa, and Australia and the company is aggressively marketing its cars in several other countries including the Middle East. Besides that, Proton cars has also been exporting a small volume of cars to Singapore, Brunei, Indonesia, Nepal, Sri Lanka, Pakistan, Bangladesh, Taiwan , Cyprus and Mauritius. 14,706 Proton cars were exported in 2006[5]
Recently Proton returned to Guangdong, China, where it did business in the past but withdrew after having poor sales record. In July 2007, Proton signed an agreement with Youngman Automobile Group Ltd. Co., paving the way for the national carmaker to offer its products and services in China. Under the agreements,Youngman will import 30,000 Gen.2 CBU (completely built-up) units and resell them under its own EuropeStar brand and eventually develop a new range of Made-in-China cars with the engineering services provided through Proton's Lotus.[6] Proton is expected to ship 1500 cars a month for 20 months starting December 2007 to fulfill the order[7].
Proton began its exports from Malaysia to other right hand drive markets like New Zealand in the late 1980s, but its success was mostly limited to the United Kingdom where it entered the market, along with Ireland, in 1989. They advertised there with the slogan Japanese Technology, Malaysian Style. Proton cars proved popular among budget-oriented motorists, and like Japanese and South Korean models before them, led to the demise of manufacturers such as the Soviet Lada and ex-Yugoslavian (now Serbia) Zastava. By the 1990s, Proton had withdrawn from the New Zealand market after offering only the Saga four-door and Persona five-door models. The company also exited the Irish market in the early 1990s, following limited success in that country. The Persona and Natura models were sold in Chile briefly during the late nineties by a local Nissan importer, but few were sold and the venture ended after two years.[citation needed] Proton sales seem to be slowly declining in the United Kingdom with 2008 sales at 1518 (0.07% share of the market), compared to 2752 in 2002. These figures are insignificant compared to 2008 UK sales of 28,036 for South Korea's Hyundai and 29,397 for Spain's SEAT. Proton enjoyed brief success as a few units of the Saga and Wira were exported to Trinidad & Tobago (Caribbean) during the late 90s where they were used mainly as rentals.
Proton also exports cars to Singapore and Australia, and now produces models in left-hand drive, for export to continental Europe. An entry into the US market was considered by Malcolm Bricklin following Hyundai's successful launch in the mid 1980s. However, exports to the US never materialized, as the cars required hundreds of changes to meet American safety standards in order to secure coverage from auto insurers and satisfy legislative requirements. Proton export models still do not comply to all environmental standards such as emission limits.
The model that Malaysia has followed with the formation of Proton may be used as a case study for rent seeking as tariffs on imported cars rose almost immediately following the formation of Proton. Also AFTA agreements on relaxing entries into the ASEAN marketspace had exemptions specifically for Proton. The Malaysian government gained a three-year exemption for Proton from 2002 to 2005 where entry tariffs had to be lowered to 5%. This was replaced by other duties resulting in no net decrease in automotive prices for importers.
In the United Kingdom, Proton cars suffer somewhat from a poor public image; they are considered poor quality products with very poor residual values compared to rivals from Kia, Chevrolet and Hyundai. In 1998 Proton attempted to change this by introducing the Proton Satria GTi - however, the car was somewhat out of reach to younger drivers due to high insurance premiums (the car was originally a group 16 and was reclassified in 2001 to group 14 but this still resulted in high premiums). The Satria GTi also sported a "Lotus Ride & Handling" badge which, coupled with an average security system, made it easy picking for a potential thief. However, the vehicle was a success as far as handling was concerned which meant that, coupled with its 1.8 16-valve Double Overhead Cam Engine (which produced 133bhp) a number were purchased by Octogon Race Circuits and used as track cars at Silverstone and Brands Hatch racing circuits.
Proton cars were imported into Trinidad and Tobago between 1993 and 2002. They were sold through a local dealer, H.E Robinson Ltd. Only the Saga and Wira ever reached this market with the Wira enjoying modest sales success. The bankruptcy of the dealership forced the exit of Proton from Trinidad and Tobago in 2002.
For a short time, the Proton Wira was marketed in the Philippines via LHD in 1994 with the establishment of Proton Pilipinas through the ASEAN Industrial Joint Venture (AIJV) Scheme[8][9] before they pulled out due to the 1997 Asian Financial Crisis.
Drop in sales
In 2006, Proton's sales dropped 30.4% from 166,118 in 2005 to 115,538 for the Malaysian market,[10][11] with a later report indicating a 55% fall of sales to 962.3 million ringgit, its lowest in at least seven years.[12] This allowed Perodua to overtake Proton as the country's largest passenger carmaker for the first time, with a 41.6% market share, while Proton's market share fell from 40% in 2005 to 32% in 2006. In the period ending December 31, 2006, Proton has also suffered three consecutive quarterly losses. Compared to a profit of 86.5 million ringgit in 2005, the car company lost 281.5 million ringgit in 2006. Proton blamed discounts from rivals. Total losses in 2007s financial year climbed to $169 million.[12]
The Employees Provident Fund (EPF) acquired an additional 830,000 shares in a transaction that spanned between January 5 and January 12, 2007.
Abortive strategic partnership with Volkswagen AG
In October 2004, Proton announced that an understanding had been reached with Volkswagen AG of Germany to establish a strategic partnership. Under the tie-up, the two carmakers were expected to exploit each other's strengths. Proton would gain access to Volkswagen's superior technical capabilities and technology. In return, Volkswagen would utilise Proton's spare capacity at the latter's Tanjung Malim plant to assemble cars for export to the South-East Asian market, where the German auto giant had a weak presence.
On 13 January 2006, Volkswagen finally announced that negotiations about the partnership had failed because VW's desires clashed with the terms and conditions offered by Proton. VW were more interested in eventually controlling Proton Holdings rather than just being a strategic partner.[14] Despite this, Malaysian news announced that Volkswagen AG has signed an agreement to buy a 51% share in Proton on 26 January 2007, which turned out to be unfounded. Throughout most of 2007, rumours about continuing merger talks with Volkswagen, and occasionally General Motors surfaced in the local press and at briefings given by top government officials.
Finally however, on 20 November 2007, Proton announced that talks regarding any partnership with Volkswagen had ended with immediate effect, citing improving sales over the year, a favorable export outlook and confidence in management turning around the company without external collaboration. This unexpected announcement resulted in a 19% overnight drop in Proton's share price to their lowest value in seven years, due to the market's perceived uncertainty about the future financial viability of the company in an increasingly competitive local and world market.[15]
Charges of protectionism
When the first Proton appeared on Malaysian roads in 1985, local wits promptly dubbed the Proton Saga as the 'Potong Harga', meaning the 'cut-price'. And for good reason as the Proton was at least 20% cheaper than non-national makes in the same 1.3 to 1.5 litre class. With both the low price and a dash of national pride working for it, the Proton got a rapid hold on the market. By 1988 the Proton had overtaken all other makes and grabbed 73% of the Malaysian passenger car market.
In 1983, when the 'national car' was planned, Malaysia had an annual new car market of about 90,000 units, and the market was growing annually by 20%. The Proton plant was designed to produce 80,000 units a year and could be geared up to 120,000 units. But in Proton's first full year of production (1986), total car sales took a severe dip to 47,000 and next year, due to a worsening economic situation, just 35,000. Only in 1988 did the market begin a recovery to 54,000 units, by now most of them Protons. Since then, the market has grown steadily to a 2005 peak of 417,000 cars[18]
Government policy has kept the Proton cheaper than other makes by the simple strategy of taxing the competition, while giving Proton exemptions or rebates from these same taxes. Duties on packages of parts for assembly into complete cars in Malaysia is said to average about 30%. Proton is exempted from most of these[19]
On 1 January 2008, the postponed-several-times full implementation of an ASEAN Free Trade Agreement [20] which Malaysia originally signed on to in January 1992, was to finally have come into effect. The agreement would effectively bar practices that discriminate against goods (including vehicles) that are considered “Made in ASEAN” by the use of Tariff and/or Non-Tariff Barriers. This would practically eliminate most of the price advantage, achieved by way of the 50% rebate Proton (and other “Malaysian-made” cars) enjoy on a hefty (75 to 105%) engine-capacity-related Excise Duty applied to new cars sold in Malaysia.
This rebate is largely responsible for the non-Malaysia ASEAN-made cars costing between 30 and 60 % more than an equivalent locally-made vehicle. With a “level playing field”, within the confines of CEPT[20] (which till end 2009 allows a maximum 5% import duty, reducing to zero in 2010) using existing FOB prices, an ASEAN (Thai-made) Honda or Toyota would sell for within 10% of a comparable Proton, and would probably result in the devastation of Proton the company. It would appear that this would be an unacceptable consequence to the Malaysian government, so for the time being, local car manufacturers will be allowed to continue receiving the excise duty rebate, with the Government picking up the tab for probable penalties it will have to pay to ASEAN members for the gross disregard of the Trade Agreement requirements.
As 2008 progressed, it became apparent that more and more global manufacturers reasoned that the level playing field stipulated by CEPT will continue to be ignored by the Malaysian government for as long as possible. This temporarily derailed these manufacturers' previous plans to use Thailand (principally) as their regional manufacturing hub, and forced them to reintroduce Malaysian-assembly of some models from CKD. This allowed these foreign marques to benefit from better tariff structures applied to such vehicles, in an effort to remain competitive (in the non-National car segment), and to narrow the price difference between their models and equivalent (Excise Duty rebated) locally-made cars.
The very latest update to the Malaysian Automotive Policy framework (October 2009) fails to mention any change in this discriminatory rebate policy, thereby reinforcing the suspicion that the Government will not abide by stipulated "level playing field" requirements for the foreseeable future. It should be noted that the main “solution” being pushed by the Malaysian Government to maintain the pricing advantage of locally-made cars, by providing grants and subsidies (to counteract any potential removal of the excise Duty rebate) would also be deemed to be non-compliant with the Trade Agreement, contravening Non-tariff barriers to trade requirements.
The lack of direct competition at Proton models' price points (in Malaysia) has also allowed Proton, for many years, to continue selling very outdated designs, generally with scant regards to providing basic safety equipment such as airbags and anti-lock braking in domestic models. Additionally, J.D. Power survey results have consistently shown that Protons have poorer rankings in initial quality than the available competition[21]
Proton is the Malaysian national automobile manufacturer (Malay acronym for PeRusahaan OTOmobil Nasional, 'National Automobile Enterprise'), which was established in 1983 under the direction of the former Prime Minister, Dr. Mahathir Mohamad. Proton Holdings Berhad, the holding company, is listed on the Bursa Malaysia.
History
Based on technology and parts from Mitsubishi Motors, production of the first model, the Proton Saga began in September 1985 at its first manufacturing plant in Shah Alam, Selangor. Initially the components of the car were entirely manufactured by Mitsubishi but slowly local parts were being used as technologies were transferred and skills were gained. The 100,000th Proton Saga was produced in January 1989.[1]
Until the end of the 1990s, the car's logo featured the crest from Malaysia's coat of arms, featuring a crescent and a fourteen-pointed star. The new Proton logo features a stylized tiger head. In 1993, a model called Proton Wira was introduced based on the Mitsubishi Lancer/Colt. More than 220,000 units were sold between 1996 and 1998.[2] Proton Perdana, based on the Mitsubishi Galant/Eterna, was first produced in 1995, intended for higher end market. The Proton Waja (Proton Impian in UK), which launched early 2001, is the first car model designed internally by Proton. By 2002 Proton held a market share of over 60% in Malaysia, which was reduced to barely 30% by 2005 and is expected to reduce further in 2008 when AFTA mandates reduce import tariffs to a maximum of 5%.
The current Proton logo, in text form.
With the acquisition of Lotus technologies in 1996 from ACBN Holdings (a company owned by the owner of Bugatti), Proton has gained an additional source of engineering and automotive expertise. This led to the production of Proton Gen-2 which was code name Wira Replacement Model (WRM) before the launch. The Gen-2 is the first of cars to be manufactured and assembled at the new manufacturing plant in Tanjung Malim, Perak which is part of Proton City development project. The plant was opened in 2004. On 8 June 2005 Proton introduced the second model to be manufactured in Tanjung Malim, the 1,200 cc 5-door supermini, the Proton Savvy. Both the Gen-2 and Savvy, were models that MG Rover was looking to rebadge when the British firm entered into collaboration talks with Proton. However these joint-venture talks were unsuccessful and MG Rover subsequently collapsed.
In 2007, Proton launch its new sedan as replacement version for Wira Sedan but with new name, Persona. The new Proton Saga replacement model (codename Proton BLM) was launched on 18 January 2008. The new Saga is based on the Savvy platform, but using Campro 1.3L instead of Renault engine. It was announced on August 8, 2008 that Proton is developing a new, fuel-efficient hybrid car to beat rising costs and address environmental concerns. Prime Minister Abdullah Ahmad Badawi told reporters that he had already test-driven the car and urged the company to continue researching energy-saving techonologies. [3]
As of 3 August 2008, Proton has produced 3 million cars since 1985, where the 3 millionth car is a second-generation Saga.[4]
Exports
Proton exports cars to the United Kingdom, South Africa, and Australia and the company is aggressively marketing its cars in several other countries including the Middle East. Besides that, Proton cars has also been exporting a small volume of cars to Singapore, Brunei, Indonesia, Nepal, Sri Lanka, Pakistan, Bangladesh, Taiwan , Cyprus and Mauritius. 14,706 Proton cars were exported in 2006[5]
Recently Proton returned to Guangdong, China, where it did business in the past but withdrew after having poor sales record. In July 2007, Proton signed an agreement with Youngman Automobile Group Ltd. Co., paving the way for the national carmaker to offer its products and services in China. Under the agreements,Youngman will import 30,000 Gen.2 CBU (completely built-up) units and resell them under its own EuropeStar brand and eventually develop a new range of Made-in-China cars with the engineering services provided through Proton's Lotus.[6] Proton is expected to ship 1500 cars a month for 20 months starting December 2007 to fulfill the order[7].
Proton began its exports from Malaysia to other right hand drive markets like New Zealand in the late 1980s, but its success was mostly limited to the United Kingdom where it entered the market, along with Ireland, in 1989. They advertised there with the slogan Japanese Technology, Malaysian Style. Proton cars proved popular among budget-oriented motorists, and like Japanese and South Korean models before them, led to the demise of manufacturers such as the Soviet Lada and ex-Yugoslavian (now Serbia) Zastava. By the 1990s, Proton had withdrawn from the New Zealand market after offering only the Saga four-door and Persona five-door models. The company also exited the Irish market in the early 1990s, following limited success in that country. The Persona and Natura models were sold in Chile briefly during the late nineties by a local Nissan importer, but few were sold and the venture ended after two years.[citation needed] Proton sales seem to be slowly declining in the United Kingdom with 2008 sales at 1518 (0.07% share of the market), compared to 2752 in 2002. These figures are insignificant compared to 2008 UK sales of 28,036 for South Korea's Hyundai and 29,397 for Spain's SEAT. Proton enjoyed brief success as a few units of the Saga and Wira were exported to Trinidad & Tobago (Caribbean) during the late 90s where they were used mainly as rentals.
Proton also exports cars to Singapore and Australia, and now produces models in left-hand drive, for export to continental Europe. An entry into the US market was considered by Malcolm Bricklin following Hyundai's successful launch in the mid 1980s. However, exports to the US never materialized, as the cars required hundreds of changes to meet American safety standards in order to secure coverage from auto insurers and satisfy legislative requirements. Proton export models still do not comply to all environmental standards such as emission limits.
The model that Malaysia has followed with the formation of Proton may be used as a case study for rent seeking as tariffs on imported cars rose almost immediately following the formation of Proton. Also AFTA agreements on relaxing entries into the ASEAN marketspace had exemptions specifically for Proton. The Malaysian government gained a three-year exemption for Proton from 2002 to 2005 where entry tariffs had to be lowered to 5%. This was replaced by other duties resulting in no net decrease in automotive prices for importers.
In the United Kingdom, Proton cars suffer somewhat from a poor public image; they are considered poor quality products with very poor residual values compared to rivals from Kia, Chevrolet and Hyundai. In 1998 Proton attempted to change this by introducing the Proton Satria GTi - however, the car was somewhat out of reach to younger drivers due to high insurance premiums (the car was originally a group 16 and was reclassified in 2001 to group 14 but this still resulted in high premiums). The Satria GTi also sported a "Lotus Ride & Handling" badge which, coupled with an average security system, made it easy picking for a potential thief. However, the vehicle was a success as far as handling was concerned which meant that, coupled with its 1.8 16-valve Double Overhead Cam Engine (which produced 133bhp) a number were purchased by Octogon Race Circuits and used as track cars at Silverstone and Brands Hatch racing circuits.
Proton cars were imported into Trinidad and Tobago between 1993 and 2002. They were sold through a local dealer, H.E Robinson Ltd. Only the Saga and Wira ever reached this market with the Wira enjoying modest sales success. The bankruptcy of the dealership forced the exit of Proton from Trinidad and Tobago in 2002.
For a short time, the Proton Wira was marketed in the Philippines via LHD in 1994 with the establishment of Proton Pilipinas through the ASEAN Industrial Joint Venture (AIJV) Scheme[8][9] before they pulled out due to the 1997 Asian Financial Crisis.
Drop in sales
In 2006, Proton's sales dropped 30.4% from 166,118 in 2005 to 115,538 for the Malaysian market,[10][11] with a later report indicating a 55% fall of sales to 962.3 million ringgit, its lowest in at least seven years.[12] This allowed Perodua to overtake Proton as the country's largest passenger carmaker for the first time, with a 41.6% market share, while Proton's market share fell from 40% in 2005 to 32% in 2006. In the period ending December 31, 2006, Proton has also suffered three consecutive quarterly losses. Compared to a profit of 86.5 million ringgit in 2005, the car company lost 281.5 million ringgit in 2006. Proton blamed discounts from rivals. Total losses in 2007s financial year climbed to $169 million.[12]
The Employees Provident Fund (EPF) acquired an additional 830,000 shares in a transaction that spanned between January 5 and January 12, 2007.
Abortive strategic partnership with Volkswagen AG
In October 2004, Proton announced that an understanding had been reached with Volkswagen AG of Germany to establish a strategic partnership. Under the tie-up, the two carmakers were expected to exploit each other's strengths. Proton would gain access to Volkswagen's superior technical capabilities and technology. In return, Volkswagen would utilise Proton's spare capacity at the latter's Tanjung Malim plant to assemble cars for export to the South-East Asian market, where the German auto giant had a weak presence.
On 13 January 2006, Volkswagen finally announced that negotiations about the partnership had failed because VW's desires clashed with the terms and conditions offered by Proton. VW were more interested in eventually controlling Proton Holdings rather than just being a strategic partner.[14] Despite this, Malaysian news announced that Volkswagen AG has signed an agreement to buy a 51% share in Proton on 26 January 2007, which turned out to be unfounded. Throughout most of 2007, rumours about continuing merger talks with Volkswagen, and occasionally General Motors surfaced in the local press and at briefings given by top government officials.
Finally however, on 20 November 2007, Proton announced that talks regarding any partnership with Volkswagen had ended with immediate effect, citing improving sales over the year, a favorable export outlook and confidence in management turning around the company without external collaboration. This unexpected announcement resulted in a 19% overnight drop in Proton's share price to their lowest value in seven years, due to the market's perceived uncertainty about the future financial viability of the company in an increasingly competitive local and world market.[15]
Charges of protectionism
When the first Proton appeared on Malaysian roads in 1985, local wits promptly dubbed the Proton Saga as the 'Potong Harga', meaning the 'cut-price'. And for good reason as the Proton was at least 20% cheaper than non-national makes in the same 1.3 to 1.5 litre class. With both the low price and a dash of national pride working for it, the Proton got a rapid hold on the market. By 1988 the Proton had overtaken all other makes and grabbed 73% of the Malaysian passenger car market.
In 1983, when the 'national car' was planned, Malaysia had an annual new car market of about 90,000 units, and the market was growing annually by 20%. The Proton plant was designed to produce 80,000 units a year and could be geared up to 120,000 units. But in Proton's first full year of production (1986), total car sales took a severe dip to 47,000 and next year, due to a worsening economic situation, just 35,000. Only in 1988 did the market begin a recovery to 54,000 units, by now most of them Protons. Since then, the market has grown steadily to a 2005 peak of 417,000 cars[18]
Government policy has kept the Proton cheaper than other makes by the simple strategy of taxing the competition, while giving Proton exemptions or rebates from these same taxes. Duties on packages of parts for assembly into complete cars in Malaysia is said to average about 30%. Proton is exempted from most of these[19]
On 1 January 2008, the postponed-several-times full implementation of an ASEAN Free Trade Agreement [20] which Malaysia originally signed on to in January 1992, was to finally have come into effect. The agreement would effectively bar practices that discriminate against goods (including vehicles) that are considered “Made in ASEAN” by the use of Tariff and/or Non-Tariff Barriers. This would practically eliminate most of the price advantage, achieved by way of the 50% rebate Proton (and other “Malaysian-made” cars) enjoy on a hefty (75 to 105%) engine-capacity-related Excise Duty applied to new cars sold in Malaysia.
This rebate is largely responsible for the non-Malaysia ASEAN-made cars costing between 30 and 60 % more than an equivalent locally-made vehicle. With a “level playing field”, within the confines of CEPT[20] (which till end 2009 allows a maximum 5% import duty, reducing to zero in 2010) using existing FOB prices, an ASEAN (Thai-made) Honda or Toyota would sell for within 10% of a comparable Proton, and would probably result in the devastation of Proton the company. It would appear that this would be an unacceptable consequence to the Malaysian government, so for the time being, local car manufacturers will be allowed to continue receiving the excise duty rebate, with the Government picking up the tab for probable penalties it will have to pay to ASEAN members for the gross disregard of the Trade Agreement requirements.
As 2008 progressed, it became apparent that more and more global manufacturers reasoned that the level playing field stipulated by CEPT will continue to be ignored by the Malaysian government for as long as possible. This temporarily derailed these manufacturers' previous plans to use Thailand (principally) as their regional manufacturing hub, and forced them to reintroduce Malaysian-assembly of some models from CKD. This allowed these foreign marques to benefit from better tariff structures applied to such vehicles, in an effort to remain competitive (in the non-National car segment), and to narrow the price difference between their models and equivalent (Excise Duty rebated) locally-made cars.
The very latest update to the Malaysian Automotive Policy framework (October 2009) fails to mention any change in this discriminatory rebate policy, thereby reinforcing the suspicion that the Government will not abide by stipulated "level playing field" requirements for the foreseeable future. It should be noted that the main “solution” being pushed by the Malaysian Government to maintain the pricing advantage of locally-made cars, by providing grants and subsidies (to counteract any potential removal of the excise Duty rebate) would also be deemed to be non-compliant with the Trade Agreement, contravening Non-tariff barriers to trade requirements.
The lack of direct competition at Proton models' price points (in Malaysia) has also allowed Proton, for many years, to continue selling very outdated designs, generally with scant regards to providing basic safety equipment such as airbags and anti-lock braking in domestic models. Additionally, J.D. Power survey results have consistently shown that Protons have poorer rankings in initial quality than the available competition[21]
Sunday, November 8, 2009
Toyota and Daihatsu developing new 'emerging market' compact car
Nikkei reports that Toyota and Daihatsu are working on a new small car that can be sold for less than US$11,000 (RM37,268) in emerging economies like India and Brazil. I’m really not sure what the big fuss is considering we have the baseline Perodua Viva BX sold here for RM25,300, but perhaps this new car will be something bigger yet cheaper. The cheapest Perodua Myvi here is the 1.0 liter SR at RM38,924.10.
This new car will be designed for developing country export markets. Right now, Toyota’s Daihatsu-sourced compact cars have been mostly export versions of its Japanese market cars with more Westernised names. For example, the Japanese market Daihatsu Coo is called the Materia in some other markets.
Toyota’s new president Akio Toyoda’s vision is for Toyota to start tailor-making products for individual regions rather than just offering the same vehicle line-up across the world market. This goes the other direction compared to the World Car projects that other automakers are embarking on. GM’s American Cobalt and Korean Optra are basically in the same segment and have been replaced by a single model – the Cruze.
But if Toyota can tailor-make different products for cheap, they may do better in terms of sales. I have a feeling making small cars for developing countries and selling them at the same price as their existing Japan market small cars have more to do with boosting profit margins rather than anything else, as customers in those regions do not really expect the kind of refinement that JDM customers do.
This new car will be designed for developing country export markets. Right now, Toyota’s Daihatsu-sourced compact cars have been mostly export versions of its Japanese market cars with more Westernised names. For example, the Japanese market Daihatsu Coo is called the Materia in some other markets.
Toyota’s new president Akio Toyoda’s vision is for Toyota to start tailor-making products for individual regions rather than just offering the same vehicle line-up across the world market. This goes the other direction compared to the World Car projects that other automakers are embarking on. GM’s American Cobalt and Korean Optra are basically in the same segment and have been replaced by a single model – the Cruze.
But if Toyota can tailor-make different products for cheap, they may do better in terms of sales. I have a feeling making small cars for developing countries and selling them at the same price as their existing Japan market small cars have more to do with boosting profit margins rather than anything else, as customers in those regions do not really expect the kind of refinement that JDM customers do.
Bullish Market 2010 For Perodua
2010....coming soon
PETALING JAYA, Oct 20 (Bernama) -- Perusahaan Otomobil Kedua Sdn Bhd (Perodua) expects to sell 176,000 cars in 2010 with the launch of its multi-purpose vehicle (MPV) which is expected to boost the sales.
Managing director, Syed Abdull Hafiz Syed Abu Bakar, said the second national car was on track to meet its target of 162,000 units for 2009 despite the global economic slowdown.
It sold 167,000 units in 2008.
"We are looking at bullish market in 2010 because we have three strong models to sell, MPV, Viva and Myvi," he told reporters after the launch of its RM6 million Body & Paint Hub (B&P Hub) here Tuesday.
"With the new MPV, which is expected to bring in sales of about 3,500-4,000 units a month, the Myvi, the best seller with over 70,000 units sold a year and over 50,000 units sold for Viva, we believe next year will bring us into a new record year," he said.
The new MPV will be launched in early November with the selling price ranging from RM56,000 to RM65,000 per unit.
Syed Abdull Hafiz said he was optimistic the 2009 car sales would surpass the Malaysian Automotive Association's full-year total industry volume forecast of 500,000 units.
"Although, the forecast number is lower compared with last year's 548,115 units, the local motor vehicle industry is still not bad compared with other countries as consumer spending is still strong.
"Personally, I believe sales can touch as high as 520,000 units," he said.
On the National Automotive Policy review, Syed Abdull Hafiz said Perodua hoped the government would continue to support the local industry players.
"We want the industry to develop, we don't want an oversupply, especially in terms of the numbers of vendors," he said, adding that he hoped Perodua and Proton would continue lead the passenger car market with 75 per cent share.
Meanwhile, Perodua's sales and after sales director, Ahmad Suhaimi Anuar, said the company planned to build four new B&P hubs by 2012 with investment of between RM4 million and RM6 million each.
Two of the four hubs would be in the northern and southern regions of the Klang Valley while the remaining two will be in the northern and southern regions of Peninsular Malaysia.
He said Perodua service intakes were forecast to increase to 1.56 million this year from 1.37 million in 2008.
For the first nine months of this year, Perodua service outlets recorded a total of 1.2 million intakes.
-- BERNAMA
PETALING JAYA, Oct 20 (Bernama) -- Perusahaan Otomobil Kedua Sdn Bhd (Perodua) expects to sell 176,000 cars in 2010 with the launch of its multi-purpose vehicle (MPV) which is expected to boost the sales.
Managing director, Syed Abdull Hafiz Syed Abu Bakar, said the second national car was on track to meet its target of 162,000 units for 2009 despite the global economic slowdown.
It sold 167,000 units in 2008.
"We are looking at bullish market in 2010 because we have three strong models to sell, MPV, Viva and Myvi," he told reporters after the launch of its RM6 million Body & Paint Hub (B&P Hub) here Tuesday.
"With the new MPV, which is expected to bring in sales of about 3,500-4,000 units a month, the Myvi, the best seller with over 70,000 units sold a year and over 50,000 units sold for Viva, we believe next year will bring us into a new record year," he said.
The new MPV will be launched in early November with the selling price ranging from RM56,000 to RM65,000 per unit.
Syed Abdull Hafiz said he was optimistic the 2009 car sales would surpass the Malaysian Automotive Association's full-year total industry volume forecast of 500,000 units.
"Although, the forecast number is lower compared with last year's 548,115 units, the local motor vehicle industry is still not bad compared with other countries as consumer spending is still strong.
"Personally, I believe sales can touch as high as 520,000 units," he said.
On the National Automotive Policy review, Syed Abdull Hafiz said Perodua hoped the government would continue to support the local industry players.
"We want the industry to develop, we don't want an oversupply, especially in terms of the numbers of vendors," he said, adding that he hoped Perodua and Proton would continue lead the passenger car market with 75 per cent share.
Meanwhile, Perodua's sales and after sales director, Ahmad Suhaimi Anuar, said the company planned to build four new B&P hubs by 2012 with investment of between RM4 million and RM6 million each.
Two of the four hubs would be in the northern and southern regions of the Klang Valley while the remaining two will be in the northern and southern regions of Peninsular Malaysia.
He said Perodua service intakes were forecast to increase to 1.56 million this year from 1.37 million in 2008.
For the first nine months of this year, Perodua service outlets recorded a total of 1.2 million intakes.
-- BERNAMA
Malaysian cars better built this year
It's times for searching locally
Malaysian cars better built this year: JD Power
By Anthony Lim
The numbers speak for themselves - according to the results of J.D. Power's Asia Pacific 2009 Malaysia Initial Quality Study (IQS), the overall new-vehicle initial quality in Malaysia has markedly improved from 2008.
The study, now in its seventh year, examines new-vehicle quality during the first two to six months of ownership.
The study measures more than 200 problem symptoms covering eight vehicle components: vehicle exterior; driving experience; features/controls/displays; audio/entertainment/navigation; seats; HVAC; vehicle interior; and engine/transmission.
All problems are summarised as the number of problems reported per 100 vehicles (PP100), and lower scores indicate a lower rate of problem incidences and higher performance. The study was based on responses from 2,874 new-vehicle owners who purchased their vehicle between Sept 2008 and May 2009, with 52 passenger car, pickup and utility vehicle models from across 15 brands evaluated.
The Malaysian average was 136 in 2009, improving by 22 from 2008, and all eight component areas showed improvement levels. Vehicle exterior issues and problems related to the driving experience represent nearly 50% of total reported problems.
In terms of specific models by segment, the Perodua Myvi ranks highest in the compact car segment for a third consecutive year with 127 PP100, followed by the Proton Savvy (154) and the Perodua Viva (186).
Meanwhile, the new Honda City ranks highest in the entry mid-size car segment, with 76 PP100. Second in the category is the Toyota Vios (107), with the Proton Saga (158) placed third.
In the mid-size car segment, the Toyota Corolla Altis takes the honours with 80 PP100, followed by the Honda Civic (103) and the Nissan Sylphy (109).
As for the MPV/van segment, Toyota's Innova takes the top spot for a second consecutive year, with a score of 85 PP100, with the Nissan Grand Livina (89) and the Toyota Avanza (100) making up the top trio.
In the pickup segment, the Isuzu D-max ranks highest with a 66 PP100 rating, well ahead of the Toyota Hilux (94) and the Mitsubishi Triton (101).
--The Star/ANN
Malaysian cars better built this year: JD Power
By Anthony Lim
The numbers speak for themselves - according to the results of J.D. Power's Asia Pacific 2009 Malaysia Initial Quality Study (IQS), the overall new-vehicle initial quality in Malaysia has markedly improved from 2008.
The study, now in its seventh year, examines new-vehicle quality during the first two to six months of ownership.
The study measures more than 200 problem symptoms covering eight vehicle components: vehicle exterior; driving experience; features/controls/displays; audio/entertainment/navigation; seats; HVAC; vehicle interior; and engine/transmission.
All problems are summarised as the number of problems reported per 100 vehicles (PP100), and lower scores indicate a lower rate of problem incidences and higher performance. The study was based on responses from 2,874 new-vehicle owners who purchased their vehicle between Sept 2008 and May 2009, with 52 passenger car, pickup and utility vehicle models from across 15 brands evaluated.
The Malaysian average was 136 in 2009, improving by 22 from 2008, and all eight component areas showed improvement levels. Vehicle exterior issues and problems related to the driving experience represent nearly 50% of total reported problems.
In terms of specific models by segment, the Perodua Myvi ranks highest in the compact car segment for a third consecutive year with 127 PP100, followed by the Proton Savvy (154) and the Perodua Viva (186).
Meanwhile, the new Honda City ranks highest in the entry mid-size car segment, with 76 PP100. Second in the category is the Toyota Vios (107), with the Proton Saga (158) placed third.
In the mid-size car segment, the Toyota Corolla Altis takes the honours with 80 PP100, followed by the Honda Civic (103) and the Nissan Sylphy (109).
As for the MPV/van segment, Toyota's Innova takes the top spot for a second consecutive year, with a score of 85 PP100, with the Nissan Grand Livina (89) and the Toyota Avanza (100) making up the top trio.
In the pickup segment, the Isuzu D-max ranks highest with a 66 PP100 rating, well ahead of the Toyota Hilux (94) and the Mitsubishi Triton (101).
--The Star/ANN
Facts you need to know about kereta viva
Here's my thoughts about kereta viva
The Perodua Viva is a city car
A city car is a small, moderately powered automobile intended for use in urban areas.It is comparable in size and features to a neighborhood electric vehicle , has four seats, and is typically long....
manufactured by Malaysian automaker Perodua
The , usually abbreviated to 'Perodua' , is Malaysia's second automobile manufacturer after Proton . It was established in 1993 and launched their first car, the Perodua Kancil in late 1994....
since May 10, 2007. It was originally planned to be the replacement of Perodua's current city cars - the Perodua Kancil
The Perodua Kancil is a city car manufactured by Malaysian automobile manufacturer Perodua since 1994. The Kancil is named after the mousedeer native to Malaysia....
and the Perodua Kelisa
The Perodua Kelisa was a city car manufactured by Malaysian automaker Perodua from 2001 to 2007. The car was an unofficial successor to the Perodua Kancil, but was offered by Perodua alongside the Kancil until both models were replaced by the Perodua Viva in 2007....
. Once launched, Perodua decided to market it as a Kelisa replacement only, and will continue to sell the Kancil. The Perodua Viva is based on the 6th generation Daihatsu Mira
The Daihatsu Mira , is a kei car-type vehicle built by the Japanese car maker Daihatsu. It comes with a variety of options and chassis variations, with the latest variant having four models: "Mira", "Mira AVY", "Mira Gino" and "Mira VAN"....
. All of the Perodua Viva models uses Daihatsu DVVT engines. Only the Premium version comes with dual airbag and ABS.
The Perodua Viva was launched with 6 models. They are 660EX manual, 850EX manual, 1.0SX Standard manual, 1.0SXi Premium manual, 1.0EZ Standard automatic and the 1.0EZi Premium automatic.
The suspension is typical of small hatchbacks with MacPherson struts in front located by an L-shaped lower arm. At the rear, Viva is fitted with a torsion beam axle and trailing arm
A trailing-arm suspension is an automobile suspension design in which one or more arms are connected between the axle and the chassis. It is usually used on rear axles....
s. The suspension geometry has been optimised for better steering response and ride comfort. The 1000 cc models have power-assisted steering, optional auto transmission and also a front stabilizer. The 660 cc and 850 cc are barebones basic models, devoid of power steering and auto transmission. As the Viva is based on Daihatsu Mira, a kei car
Kei car, K-car, or , is a Japanese category of small automobiles, including automobiles, microvan, and kei truck. They are designed to exploit local tax and insurance relaxations, and in more rural areas are exempted from the requirement to certify that adequate parking is available for the vehicle....
, it has a compact exterior dimensions and a small turning radius. It is roomy for its class, with enough room for 4 adults comfortably.
Viva comes with 3-cylinder
A straight-3 or inline-3 is an internal combustion engine with three cylinder s arranged in a straight line side by side.Most straight-3 engines employ a crank angle of 120? and are thus rotationally balanced; however, since the three cylinders are offset from each other, the firing of the end cylinders induces a rocking motion from e...
engine choices: 660 cc, 850 cc and 1000 cc. They are familiar engines but updated with modern technology such as DVVT (Dynamic Variable Valve Timing) and EFI
Fuel injection is a system for mixing fuel with air in an internal combustion engine. It has become the primary fuel delivery system used in gasoline Automobile engines, having almost completely replaced carburetors in the late 1980s....
, and they all have twin overhead camshafts to provide even stronger low-speed pulling power, resulting in fewer gearchanges, yet also manages to increase top end power. Other innovations include a resin port intake manifold and a head cover incorporating an air-cleaner casing.
Fuel economy varies from 15.1 km/l (42.6 mpg (imp)) for the fully loaded 1000 cc auto version to the very thrifty 18.7 km/l (53 mpg) for the basic 660 cc model. For the 1000 cc manual the 0-100 km/h time is about 12.80 seconds. The engine torque band is not peaky and timing it takes to hit is good. It may be pushed to without much effort. However the engine drones at such speeds. Top speed is around .
The Perodua Viva is a city car
City car
A city car is a small, moderately powered automobile intended for use in urban areas.It is comparable in size and features to a neighborhood electric vehicle , has four seats, and is typically long....
manufactured by Malaysian automaker Perodua
Perodua
The , usually abbreviated to 'Perodua' , is Malaysia's second automobile manufacturer after Proton . It was established in 1993 and launched their first car, the Perodua Kancil in late 1994....
since May 10, 2007. It was originally planned to be the replacement of Perodua's current city cars - the Perodua Kancil
Perodua Kancil
The Perodua Kancil is a city car manufactured by Malaysian automobile manufacturer Perodua since 1994. The Kancil is named after the mousedeer native to Malaysia....
and the Perodua Kelisa
Perodua Kelisa
The Perodua Kelisa was a city car manufactured by Malaysian automaker Perodua from 2001 to 2007. The car was an unofficial successor to the Perodua Kancil, but was offered by Perodua alongside the Kancil until both models were replaced by the Perodua Viva in 2007....
. Once launched, Perodua decided to market it as a Kelisa replacement only, and will continue to sell the Kancil. The Perodua Viva is based on the 6th generation Daihatsu Mira
Daihatsu Mira
The Daihatsu Mira , is a kei car-type vehicle built by the Japanese car maker Daihatsu. It comes with a variety of options and chassis variations, with the latest variant having four models: "Mira", "Mira AVY", "Mira Gino" and "Mira VAN"....
. All of the Perodua Viva models uses Daihatsu DVVT engines. Only the Premium version comes with dual airbag and ABS.
Specifications
The Perodua Viva was launched with 6 models. They are 660EX manual, 850EX manual, 1.0SX Standard manual, 1.0SXi Premium manual, 1.0EZ Standard automatic and the 1.0EZi Premium automatic.
The suspension is typical of small hatchbacks with MacPherson struts in front located by an L-shaped lower arm. At the rear, Viva is fitted with a torsion beam axle and trailing arm
Trailing arm
A trailing-arm suspension is an automobile suspension design in which one or more arms are connected between the axle and the chassis. It is usually used on rear axles....
s. The suspension geometry has been optimised for better steering response and ride comfort. The 1000 cc models have power-assisted steering, optional auto transmission and also a front stabilizer. The 660 cc and 850 cc are barebones basic models, devoid of power steering and auto transmission. As the Viva is based on Daihatsu Mira, a kei car
Kei car
Kei car, K-car, or , is a Japanese category of small automobiles, including automobiles, microvan, and kei truck. They are designed to exploit local tax and insurance relaxations, and in more rural areas are exempted from the requirement to certify that adequate parking is available for the vehicle....
, it has a compact exterior dimensions and a small turning radius. It is roomy for its class, with enough room for 4 adults comfortably.
Engines and performance
Viva comes with 3-cylinder
Straight-3
A straight-3 or inline-3 is an internal combustion engine with three cylinder s arranged in a straight line side by side.Most straight-3 engines employ a crank angle of 120? and are thus rotationally balanced; however, since the three cylinders are offset from each other, the firing of the end cylinders induces a rocking motion from e...
engine choices: 660 cc, 850 cc and 1000 cc. They are familiar engines but updated with modern technology such as DVVT (Dynamic Variable Valve Timing) and EFI
Fuel injection
Fuel injection is a system for mixing fuel with air in an internal combustion engine. It has become the primary fuel delivery system used in gasoline Automobile engines, having almost completely replaced carburetors in the late 1980s....
, and they all have twin overhead camshafts to provide even stronger low-speed pulling power, resulting in fewer gearchanges, yet also manages to increase top end power. Other innovations include a resin port intake manifold and a head cover incorporating an air-cleaner casing.
- EF-VE 660 (659 cc) – at 7200 rpm, at 4400 rpm also used in Daihatsu HijetDaihatsu Hijet
The Daihatsu Hijet is a microvan and pickup truck produced by the Japanese automaker Daihatsu. Despite the similarities between the Hijet name and Toyota's naming scheme for its trucks and vans , the name "Hijet" has been in use for Daihatsu's Kei trucks and vans since at least the 1970s, over two decades before Toyota took control.... - ED-VE 850 (847 cc) – at 6000 rpm, at 4000 rpm which is developed from the engine that powered the Daihatsu MoveDaihatsu Move
The Daihatsu Move is a kei car, produced by Japanese automaker Daihatsu since August 1995. The Move is designed to be as tall as compact cars like the Suzuki Wagon R.... - EJ-VE 1000 (989 cc) – at 6000 rpm, at 3600 rpm also used in some versions of Daihatsu SirionDaihatsu Sirion
The Daihatsu Sirion is a subcompact car produced by the Japanese automaker Daihatsu since 1998 and marketed variously as the Daihatsu Storia , Daihatsu Boon, Toyota Duet and Toyota Passo....
and Perodua MyviPerodua MyVi
The Perodua Myvi is a supermini/Subcompact car hatchback manufactured by Malaysian car maker Perodua since 2005. Based on the second generation Daihatsu Sirion, the Myvi is the result of Perodua's collaboration with both Toyota and Daihatsu....
Fuel economy varies from 15.1 km/l (42.6 mpg (imp)) for the fully loaded 1000 cc auto version to the very thrifty 18.7 km/l (53 mpg) for the basic 660 cc model. For the 1000 cc manual the 0-100 km/h time is about 12.80 seconds. The engine torque band is not peaky and timing it takes to hit is good. It may be pushed to without much effort. However the engine drones at such speeds. Top speed is around .
Subscribe to:
Posts (Atom)